STS 7030 Fuel Maintenance System

STS 7030 Fuel Maintenance System

The STS 7030 is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s NEMA 4 rated enclosure allows for both outdoor and indoor installations by protecting the system from windblown dust and rain, hose directed water, and ice formations. With a 30 GPM flow rate, the STS 7030 can polish up to 14,400 gallons (54,510 liters) of fuel in a runtime of 8-hours. Robust system upgrades are available for this system and can be found under the “System Upgrades” tab below.

  • Product Specifications
  • System Upgrades
  • Technical Documents
  • Troubleshooting
Nominal Flow Rate
30 GPM/1,800 GPH (113.6 LPM/6,813.7 LPH)
Primary Filter
1, 5, 10, or 25μ Particulate or Water Block Filter Element
Secondary Filter
1, 5, 10, or 25μ Coalescing Filter Element
Fuel Conditioner
LG-X 4000 Inline Magnetic Conditioner
Pump
2 HP Spur Gear Pump
System Controller
7000 Series Smart Filtration Controller with Safety and Alarm Features
Power
480V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Plumbing
Black Iron
Ports
2” NPT In, 1.5” NPT Out
Enclosure
NEMA 4 Rated Powder Coated or NEMA 4X Rated Stainless Steel
Dimensions
≈ 56” x 72” x 17” (142 x 183 x 43 cm) (H x W x D)
Weight
≈ 760 lbs (345 kg)

*50 Hz configuration decreases nominal flow rate from 30 GPM (113.5 LPM) to 24 GPM (90.8 LPM)

Auto Water Drain (AWD)
Automatically drain water separator of collected water for decreased maintenance frequency
Manual Additive Injection
Manually draw additive into the polisher to treat fuel supply
Auto Additive Injection
Treat fuel supply with an automated and precise injection of fuel additive
Multi-Tank
Service multiple tanks with a single STS system
Enclosure Heater
Prevent the build up of condensation inside the system enclosure due to temperature changes

Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).

Nominal Flow Rate
30 GPM/1,800 GPH (113.6 LPM/6,813.7 LPH)
Primary Filter
1, 5, 10, or 25μ Particulate or Water Block Filter Element
Secondary Filter
1, 5, 10, or 25μ Coalescing Filter Element
Fuel Conditioner
LG-X 4000 Inline Magnetic Conditioner
Pump
2 HP Spur Gear Pump
System Controller
7000 Series Smart Filtration Controller with Safety and Alarm Features
Power
480V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Plumbing
Black Iron
Ports
2” NPT In, 1.5” NPT Out
Enclosure
NEMA 4 Rated Powder Coated or NEMA 4X Rated Stainless Steel
Dimensions
≈ 56” x 72” x 17” (142 x 183 x 43 cm) (H x W x D)
Weight
≈ 760 lbs (345 kg)

*50 Hz configuration decreases nominal flow rate from 30 GPM (113.5 LPM) to 24 GPM (90.8 LPM)

Auto Water Drain (AWD)
Automatically drain water separator of collected water for decreased maintenance frequency
Manual Additive Injection
Manually draw additive into the polisher to treat fuel supply
Auto Additive Injection
Treat fuel supply with an automated and precise injection of fuel additive
Multi-Tank
Service multiple tanks with a single STS system
Enclosure Heater
Prevent the build up of condensation inside the system enclosure due to temperature changes

Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).