AXI International Logo
AXI International Logo
Industries
Products
Contact Us
AXI International White Logo
Industries
Products
Contact Us
AXI International Logo

MTC HC-300

Mobile Fuel Polishing System

  • Removes heavy and fine contaminants such as sludge, water, and particulates from fuel storage tanks
  • Adjustable fuel polishing flow rate with included variable frequency device (10 - 300 GPM)
  • Multi-Stage filtration process with fine filter bypass 
  • Prevents unnecessary mess, catching potential drips or spills produced during routine filter changes with the skid's 200 gallon leak basin 
Product Details
Product Specifications
Technical Documents
Troubleshooting
The MTC HC-300 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s skid-based design can be mounted to an MTC Trailer to allow for maximum portability and ease of transportation. The MTC HC-300 features a multi-phase fuel polishing process that allow users to remove water and larger particulate across multiple filtration vessels. With an adjustable flow rate range of 10 to 300 GPM, the MTC HC-300 can polish up to 144,000 gallons (545,099 liters) of fuel in a runtime of 8-hours.

System Features:

Multi-Stage Filtration
Remediate fuel to desired cleanliness level with a multi-stage filtration process   
Fine Filter Bypass
Spare fine filters during heavy contaminant removal
Adjustable Flow Rates
Adjust fuel polishing flow rates between 10 - 300 GPM
Leak Basin
Capture potential drips or spills produced during routine filter changes with a 200 gallon leak basin
Nominal Flow Rate
10 - 300 GPM (27.9 - 1,135.6 LPM)
Primary Filter
Four-Bag Filter Vessel, Liner Basket for use with 1 - 800μ Bag Filters
Secondary Filters
Four-Cartridge Filter Vessel, 2 - 30μ Particulate, 10 - 30μ Water Block, or 3 - 10μ Micro-glass Filters
Fuel Conditioner
3" Inline Magnetic Conditioner
Pump
15 HP Sliding Vane Pump
System Controller
SFC80 Smart Filtration Controller with Safety and Alarm Features
Power
480V/60Hz/3Ph
Plumbing
Black Iron
Ports
4” Cam & Groove In, 4” Cam & Groove Out
Skid
Powder Coated Carbon Steel w/ 200 Gallon Leak Basin
Dimensions
≈ 96” x 54” x 82” (244 x 137 x 208 cm) (H x W x D)
Weight
≈ 5,500 lbs (2,495 kg)
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).

    Product Details

    The MTC HC-300 is a high capacity mobile fuel polishing system that removes water, sludge, sediment, and other contaminants that accumulate in fuel storage tanks. The system’s skid-based design can be mounted to an MTC Trailer to allow for maximum portability and ease of transportation. The MTC HC-300 features a multi-phase fuel polishing process that allow users to remove water and larger particulate across multiple filtration vessels. With an adjustable flow rate range of 10 to 300 GPM, the MTC HC-300 can polish up to 144,000 gallons (545,099 liters) of fuel in a runtime of 8-hours.

    System Features:

    Multi-Stage Filtration
    Remediate fuel to desired cleanliness level with a multi-stage filtration process   
    Fine Filter Bypass
    Spare fine filters during heavy contaminant removal
    Adjustable Flow Rates
    Adjust fuel polishing flow rates between 10 - 300 GPM
    Leak Basin
    Capture potential drips or spills produced during routine filter changes with a 200 gallon leak basin

    Product Specifications

    Nominal Flow Rate
    10 - 300 GPM (27.9 - 1,135.6 LPM)
    Primary Filter
    Four-Bag Filter Vessel, Liner Basket for use with 1 - 800μ Bag Filters
    Secondary Filters
    Four-Cartridge Filter Vessel, 2 - 30μ Particulate, 10 - 30μ Water Block, or 3 - 10μ Micro-glass Filters
    Fuel Conditioner
    3" Inline Magnetic Conditioner
    Pump
    15 HP Sliding Vane Pump
    System Controller
    SFC80 Smart Filtration Controller with Safety and Alarm Features
    Power
    480V/60Hz/3Ph
    Plumbing
    Black Iron
    Ports
    4” Cam & Groove In, 4” Cam & Groove Out
    Skid
    Powder Coated Carbon Steel w/ 200 Gallon Leak Basin
    Dimensions
    ≈ 96” x 54” x 82” (244 x 137 x 208 cm) (H x W x D)
    Weight
    ≈ 5,500 lbs (2,495 kg)

    Technical Documents

    Troubleshooting

    Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).

      AXI International linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram