AXI International Logo
AXI International Logo

FPS SX-F Fuel Maintenance System

The FPS SX-F is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s compact design allows for tight indoor installations such as inside gen-set enclosures or engine rooms. With a 2.5 GPM flow rate, the FPS SX-F can polish up to 1,200 gallons (4,543 liters) of fuel in a runtime of 8-hours. Robust system upgrades are available for this system and can be found under the “System Upgrades” tab below.
Product Specifications
System Upgrades
Technical Documents
Troubleshooting
Nominal Flow Rate
2.5 GPM/150 GPH (9.5 LPM/567.8 LPH)
Primary Filter
10 or 30μ Particulate or 60μ Stainless Steel Screen with Centrifugal Water Separator
Secondary Filter
3, 10 or 25μ Fine Filter or 3, 10μ Water Block
Fuel Conditioner
LG-X 500 Inline Magnetic Conditioner
Pump
1/3 HP Spur Gear Pump
System Controller
SFC-50 Smart Filtration Controller with Safety and Alarm Features
Power
120V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Plumbing
Black Iron
Ports
3/4” Equivalent JIC 37° Flare In, 1/2” Equivalent JIC 37° Flare Out
Construction
Powder Coated Aluminum Back Plate
Dimensions
≈ 23” x 26“ x 9” (58 x 69 x 23 cm) (H x W x D)
Weight
≈ 57 lbs (25.9 kg)
*50 Hz configuration decreases nominal flow rate from 2.5 GPM (9.5 LPM) to 2 GPM (7.6 LPM)
TSC-7000 Controller
Intuitive HMI touchscreen control
Auto Water Drain (AWD)*
Automatically drain water separator of collected water for decreased maintenance frequency
Auto Filter Drain (AFD)*
Manually drain system fine filter(s) for spill free servicing
Manual Additive Injection
Manually draw additive into the polisher to treat fuel supply
Auto Additive Injection*
Treat fuel supply with an automated and precise injection of fuel additive
Multi-Point Flow Path*
Add multiple supply and return valves for better tank cleaning coverage
*Requires TSC-7000 controller upgrade
Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).







    Product Specifications

    Nominal Flow Rate
    2.5 GPM/150 GPH (9.5 LPM/567.8 LPH)
    Primary Filter
    10 or 30μ Particulate or 60μ Stainless Steel Screen with Centrifugal Water Separator
    Secondary Filter
    3, 10 or 25μ Fine Filter or 3, 10μ Water Block
    Fuel Conditioner
    LG-X 500 Inline Magnetic Conditioner
    Pump
    1/3 HP Spur Gear Pump
    System Controller
    SFC-50 Smart Filtration Controller with Safety and Alarm Features
    Power
    120V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
    Plumbing
    Black Iron
    Ports
    3/4” Equivalent JIC 37° Flare In, 1/2” Equivalent JIC 37° Flare Out
    Construction
    Powder Coated Aluminum Back Plate
    Dimensions
    ≈ 23” x 26“ x 9” (58 x 69 x 23 cm) (H x W x D)
    Weight
    ≈ 57 lbs (25.9 kg)
    *50 Hz configuration decreases nominal flow rate from 2.5 GPM (9.5 LPM) to 2 GPM (7.6 LPM)

    System Upgrades

    TSC-7000 Controller
    Intuitive HMI touchscreen control
    Auto Water Drain (AWD)*
    Automatically drain water separator of collected water for decreased maintenance frequency
    Auto Filter Drain (AFD)*
    Manually drain system fine filter(s) for spill free servicing
    Manual Additive Injection
    Manually draw additive into the polisher to treat fuel supply
    Auto Additive Injection*
    Treat fuel supply with an automated and precise injection of fuel additive
    Multi-Point Flow Path*
    Add multiple supply and return valves for better tank cleaning coverage
    *Requires TSC-7000 controller upgrade

    Technical Documents

    Troubleshooting

    Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).







      List of organizations AXI International is associated or a part of. This include PEI, AFCOM, Better Business Bureau, 7x24 Exhange, NFPA, EGSA, Green Clean Certification
      All company names, logos, and brands are property of their respective owners. Use of these names, logos, and brands does not imply endorsement.
      Copyright © 2020 AXI International | All Rights Reserved.
      Do NOT follow this link or you will be banned from the site! linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram