FPS MX-F Fuel Maintenance System

FPS MX-F Fuel Maintenance System

The FPS MX-F is a programmable, fully automated, fuel maintenance system that removes water, sludge, and other contaminants from fuel storage tanks through routine filtration. The system’s compact design allows for tight indoor installations such as inside gen-set enclosures or engine rooms. With a 4 GPM flow rate, the FPS MX-F can polish up to 1,920 gallons (7,268 liters) of fuel in a runtime of 8-hours. Robust system upgrades are available for this system and can be found under the “System Upgrades” tab below.

  • Product Specifications
  • System Upgrades
  • Technical Documents
  • Troubleshooting
Nominal Flow Rate
4 GPM/240 GPH (15 LPM/984.2 LPH)
Primary Filter
10 or 30μ Particulate or 60μ Stainless Steel Screen with Centrifugal Water Separator
Secondary Filter
1, 3, 10 or 25μ Fine Filter or 3, 10μ Water Block
Fuel Conditioner
LG-X 1500 Inline Magnetic Conditioner
Pump
1/3 HP Spur Gear Pump
System Controller
SFC-50 Smart Filtration Controller with Safety and Alarm Features
Power
120V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Plumbing
Black Iron
Ports
3/4” Equivalent JIC 37° Flare In, 3/4” Equivalent JIC 37° Flare Out
Construction
Powder Coated Aluminum Back Plate
Dimensions
≈ 23” x 26“ x 9” (58 x 69 x 23 cm) (H x W x D)
Weight
≈ 70 lbs (31.8 kg)

*50 Hz configuration decreases nominal flow rate from 4 GPM (15 LPM) to 3.2 GPM (12 LPM)

TSC-7000 Controller
Intuitive HMI touchscreen control
Auto Water Drain (AWD)*
Automatically drain water separator of collected water for decreased maintenance frequency
Auto Filter Drain (AFD)*
Manually drain system fine filter(s) for spill free servicing
Manual Additive Injection
Manually draw additive into the polisher to treat the fuel supply
Auto Additive Injection*
Treat fuel supply with an automated and precise injection of fuel additive
Multi-Point Flow Path Upgrade*
Add multiple supply and return valves for better tank cleaning coverage

*Requires TSC-7000 controller upgrade

Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).

Nominal Flow Rate
4 GPM/240 GPH (15 LPM/984.2 LPH)
Primary Filter
10 or 30μ Particulate or 60μ Stainless Steel Screen with Centrifugal Water Separator
Secondary Filter
1, 3, 10 or 25μ Fine Filter or 3, 10μ Water Block
Fuel Conditioner
LG-X 1500 Inline Magnetic Conditioner
Pump
1/3 HP Spur Gear Pump
System Controller
SFC-50 Smart Filtration Controller with Safety and Alarm Features
Power
120V/60Hz/15A/1Ph or 230V/50Hz/15A/1Ph*
Plumbing
Black Iron
Ports
3/4” Equivalent JIC 37° Flare In, 3/4” Equivalent JIC 37° Flare Out
Construction
Powder Coated Aluminum Back Plate
Dimensions
≈ 23” x 26“ x 9” (58 x 69 x 23 cm) (H x W x D)
Weight
≈ 70 lbs (31.8 kg)

*50 Hz configuration decreases nominal flow rate from 4 GPM (15 LPM) to 3.2 GPM (12 LPM)

TSC-7000 Controller
Intuitive HMI touchscreen control
Auto Water Drain (AWD)*
Automatically drain water separator of collected water for decreased maintenance frequency
Auto Filter Drain (AFD)*
Manually drain system fine filter(s) for spill free servicing
Manual Additive Injection
Manually draw additive into the polisher to treat the fuel supply
Auto Additive Injection*
Treat fuel supply with an automated and precise injection of fuel additive
Multi-Point Flow Path Upgrade*
Add multiple supply and return valves for better tank cleaning coverage

*Requires TSC-7000 controller upgrade

Please consult the “Troubleshooting” section of the system manual to diagnose any issues you may be experiencing. The manual can be found under the “Technical Documents” tab. If you need additional assistance feel free to reach out via the contact form below or by phone (+1-877-425-4239) during AXI International’s operating hours (Monday – Friday, 8am – 5pm EST).